20 foot to phone socket

[Itshim]

Would really like to put the PC up stairs phone socket is in the hall . What is my best plan extention to lead - Thats a lot of wire ! any gizmos out there?

[Nugget]

Originally Posted by Itshim

Would really like to put the PC up stairs phone socket is in the hall . What is my best plan extention to lead - Thats a lot of wire ! any gizmos out there?

Would something like this be any good?

http://www.satcure.co.uk/accs/page22.htm#sv1500



---------- Post added at 14:03 ---------- Previous post was at 14:01 ----------

Or this, for that matter

http://www.maplin.co.uk/Module.aspx?...=SEO&U=strat15

[skyblueheroes]

For that kind of distance I'd go for wireless. Either that or get an extension put in - either by yourself or a leccy.

[Itshim]

Knew I could rely on you guys to know the answer

Thank very much

[matt_2k34]

One For All SV1500 - "Wireless" phoneline extension kit

No phone point near your Digibox or computer?

The transmitter plugs into the nearest 13 Amp socket and transmits the signal through your 230v mains wiring to the extension unit! Typical speed 38 - 42bps with a "56k" modem. Works with normal voice phone, too. (Will not extend ADSL broadband) MORE INFOOne For All SV1500 - "Wireless" phoneline extension kit

No phone point near your Digibox or computer?

The transmitter plugs into the nearest 13 Amp socket and transmits the signal through your 230v mains wiring to the extension unit! Typical speed 38 - 42bps with a "56k" modem. Works with normal voice phone, too. (Will not extend ADSL broadband) MORE INFOOne For All SV1500 - "Wireless" phoneline extension kit

No phone point near your Digibox or computer?

The transmitter plugs into the nearest 13 Amp socket and transmits the signal through your 230v mains wiring to the extension unit! Typical speed 38 - 42bps with a "56k" modem. Works with normal voice phone, too. (Will not extend ADSL broadband) MORE INFO

Best is a cabled extention - any joins cut the plugs and hardwire if you can - if not push firmly together and either a) cover it in rubber hardener or b) elecy tape round it make sure it dont move.