[Sephiroth]

Originally Posted by Pukka

Attached is a photo of a job we did for a customer with 550 meters of fibre.

Does anyone know the power requirement of the virgin modem? ours is in the loft.

For costing

1x Box (305 meters) cat6 £80.00 (make sure is NOT CCA) we use Excel brand here.
1x POE injector £19.20 https://linitx.com/product/ubiquiti-...e-50-60w/14097
2x Ethernet Repeater £19.20 (max 310 meters) https://linitx.com/product/mikrotik-...-source)/16092
2x case for above £7.20 https://linitx.com/product/mikrotik-...p67-case/16167
1x 48v to 12v adaptor https://www.amazon.co.uk/TP-LINK-TL-...puters&sr=1-10

you will need a box to put the router in. https://www.screwfix.com/p/hylec-ip6...-x-350mm/7766g


This would give you 45V at the cab which should be more than enough for the adaptor. Please note this is only theroy and would need a test before you continue, if it was me I would ask virgin to run 150 meters and then you run 150 meters the other way. put the router in modem mode and then provide your own router in the house

The difference here is that your image shows OPENREACH FTTP (the customer’s cabinet). For that to work with VM, he would need to be in a fibre area (FTTP) otherwise it can’t be done.