I have the EXACT same problem, it all dies apart from a orange light. Was just on here to ask for help :P
It also happens even if the other computer is on or off. I talked to Belkin and got this
Quote:
Raymond Gray: Please connect the computer to the LAN port on the router and connect the modem to the Internet/WAN port, using Ethernet cables.
Raymond Gray: Please take a paper clip and insert the paper clip on the reset hole of the router and hold it for 40 seconds.
Raymond Gray: The power light will flash and then come back ON solid, indicating that the router is being restored to factory defaults.
Raymond Gray: The corresponding lights on the front of the router should be lit up.
Raymond Gray: On the computer, check if you have an IP address in the range of 192.168.2.x
Raymond Gray: If not, specify a static IP address, gateway and DNS by following the steps at http://web.belkin.com/support/kb/kb.asp?a=2824
Raymond Gray: Log on to the router web interface at http://192.168.2.1
Raymond Gray: By default, the password is blank.
Raymond Gray: Click on Connection Type in the left hand column under Internet WAN heading and configure the settings for your ISP.
Raymond Gray: This will fix the issue.
|
Just gonna try that now. Oh and for connection type its says NTL is dynamic, is that correct?