Cable Forum - View Single Post

heero_yuy · 09-05-2018, 13:30

Given that the PC is showing that the interface is all running correctly, sounds to me more that the Superhub is not issuing an IP to wired devices.

Try a reboot of the SH. You will probably need to issue an ipconfig /renew command on the PC.

This makes a DHCP request for a fresh IP number from the SH. This is normally done while the PC is booting up.

If still no joy log into the SH and check to see that it is being told to issue IP's to the wired part of the network.

HTH

If you're using your own router then you need to look at its settings rather than the SH

09-05-2018, 13:30	#31
heero_yuy Perfect Soldier Join Date: Mar 2009 Location: Worthing West Sussex Age: 67 Services: VM 500M SH3 thingy in modem mode XL TV V6 Sony Bravia smart TV and M phone Posts: 11,012	Re: Ethernet not working Given that the PC is showing that the interface is all running correctly, sounds to me more that the Superhub is not issuing an IP to wired devices. Try a reboot of the SH. You will probably need to issue an ipconfig /renew command on the PC. This makes a DHCP request for a fresh IP number from the SH. This is normally done while the PC is booting up. If still no joy log into the SH and check to see that it is being told to issue IP's to the wired part of the network. HTH If you're using your own router then you need to look at its settings rather than the SH __________________ History is much like an endless waltz: The three beats of war, peace and revolution continue on forever. However history will change with my coronation - Mariemaia Khushrenada Last edited by heero_yuy; 09-05-2018 at 13:40. Reason: Own router comment